Linksys WAG200G Link Logger Set Up

NOTE you must be running at least firmware version 1.01.04 as the logging in 1.00.09 is broken

1.Download and Install Link Logger

2. Next Configure Link Logger

To find this screen select 'Edit' from the main menu and then select the 'Setup...' option and click on the 'Router' tab.  The Router Address is the internal LAN IP address of your Linksys Router (192.168.1.1 by default).

Since the Linksys doesn't include any information concerning what action it took with the traffic events (ie blocked, forwarded etc) Link Logger can determine that action if it knows the WAN IP Address (ie Link Logger will be able to show what traffic was blocked etc).

3. Configure the Linksys Router to Log Traffic and send it to Link Logger

Enable 'Log:' and set the 'Logviewer IP Address' to the LAN IP address of the system which is running Link Logger (192.168.1.101 for example).

4. Link Logger should start logging your traffic.

If Link Logger is still not working email Link Logger Support