Netgear FVS318/FVM318 Link Logger Set Up

1.Download and Install Link Logger

2. Next Configure Link Logger

To find this screen select 'Edit' from the main menu and then select the 'Setup...' option and click on the 'Router' tab.  The Router Address is the internal LAN IP address of your Netgear Firewall (192.168.0.1 by default).

3. Configure your Firewall to Log Traffic and send it to Link Logger

4. Link Logger should start logging your traffic.

FAQ for Install Issues

• If you get an error when starting Link Logger, please make sure that you don't have other logging software running when you start Link Logger, as only one application can process Syslog messages at a time.

• If Link Logger doesn't work and your running ZoneAlarm or any similar software firewall ensure that it is allowing communication between Link Logger and your firewall.  Link Logger does attempt to ping your router on startup, and your Netgear Firewall sends its logging information to Link Logger via Syslog (UDP port 514).  If the ping is blocked then Link Logger displays a message stating that it couldn't communicate with the Router.  If the Syslog messages are blocked then Link Logger doesn't log anything as it doesn't receive any logging information.

• Link Logger does have an uninstall program for easy removal.  You can remove Link Logger using 'Remove Programs' in the Windows Control Panel.

If Link Logger is still not working email Link Logger Support