Netgear FVS124G Link Logger Set Up

running V1.1.48 firmware

1.Download and Install Link Logger

2. Next Configure Link Logger

To find this screen select 'Edit' from the main menu and then select the 'Setup...' option and click on the 'Router' tab.  The Router Address is the internal LAN IP address of your Netgear Router (192.168.1.1 by default).

3. Configure the Netgear Router to send its logging information to the IP Address of the system running Link Logger.

4. By default the FVS124G does not log outbound traffic, so to log outbound traffic add a custom rule for outbound traffic.

Rule Details

5. Link Logger should start logging your traffic.

If Link Logger is still not working email Link Logger Support